Skip to Main Content

CEE340L v2

Module 1 Required Resources

Sections to study for pre-setting up:

  1. Read and follow the opening sections of the Freenove tutorial document. 
  1. Read Chapter 0 of the Freenove document to perform all needed setup. 
  1. Setup and enable I2C bus on your RPI device – Refer to Chapter 7 of the Freenove document for the section named Enable I2C. 

Sections to study for Python use:

Cookbook Sections 5.2, 5.5  - 5.11, 5.20 - 5.26  

Sections to study for setting up RPI:

Cookbook Sections 1.1  - 1.3, Appendix B - study GPIO pin layout  

Sections to study to setup networking:

Cookbook Sections 2.0 - 2.6, 3.0  - 3.22  

Sections to study to setup OS:

Cookbook Sections 1.6, 1.7, 1.9  - 1.13 (run your first Python test program), 1.14  - 1.17